Oppoinions : The case of the ill fitting coil packs

Kinja'd!!! "CalzoneGolem" (calzonegolem)
01/04/2020 at 08:30 • Filed to: the toaster

Kinja'd!!!0 Kinja'd!!! 11

UPDATE: I used twist ties.

There was a random missfire popping up. Changed ncoil packs and it went away. But the coil packs don’t click securely into the wiring harnass connectors.

Kinja'd!!!

You can’t tell but the nub on the left is slightly smaller in all dimensions than the right one.

Should I put a little dab of ultra grey or some silicone on the end of the connector to keep them wiggling out?

Kinja'd!!!

Twist ties around the base of the coil packc connector and around the back of the wire loom connectorsshould keep them in securely.


DISCUSSION (11)


Kinja'd!!! atfsgeoff > CalzoneGolem
01/04/2020 at 08:59

Kinja'd!!!2

I’d use the wire from a twist tie to secure the connector to it. Less messy down the road.


Kinja'd!!! CalzoneGolem > atfsgeoff
01/04/2020 at 09:08

Kinja'd!!!0

I was thinking about how I could use zip ties but twist ties would work the treat!


Kinja'd!!! I like cars: Jim Spanfeller is one ugly motherfucker > CalzoneGolem
01/04/2020 at 09:12

Kinja'd!!!1

Zip tie and send it all the way


Kinja'd!!! M.T. Blake > CalzoneGolem
01/04/2020 at 09:32

Kinja'd!!!2

Hamish:
Some (nubs)  are longer than others.

Campbell:
Your mother’s been telling stories about me again, ah?


Kinja'd!!! CalzoneGolem > I like cars: Jim Spanfeller is one ugly motherfucker
01/04/2020 at 09:43

Kinja'd!!!0

I don't think I can fit zip ties. I ended up using twist ties.


Kinja'd!!! CalzoneGolem > M.T. Blake
01/04/2020 at 10:10

Kinja'd!!!0

I like big nubs.


Kinja'd!!! dogisbadob > CalzoneGolem
01/04/2020 at 11:52

Kinja'd!!!1

Is there any crud or anything in the socket?

Sometimes aftermarket parts don’t always fit right .


Kinja'd!!! Manwich - now Keto-Friendly > CalzoneGolem
01/04/2020 at 13:16

Kinja'd!!!2

I would order another set of coil packs from a different/better brand if they aren’t too expensive. 


Kinja'd!!! MrDakka > CalzoneGolem
01/04/2020 at 13:32

Kinja'd!!!1

You can get some really thin PC cable management zip  ties that should do the trick


Kinja'd!!! CalzoneGolem > dogisbadob
01/04/2020 at 14:31

Kinja'd!!!1

Nah I made sure to clean them out. It’s just the nub being just slightly too small.


Kinja'd!!! CalzoneGolem > Manwich - now Keto-Friendly
01/06/2020 at 11:40

Kinja'd!!!0

I bought nice midrange coils off Ro ckAuto and they were $30 each. The next level was $50 each. I don’t think it’ll be a big deal. They’d worked for a couple weeks with no reinforcement so they should be fine with the twist ties.